הבלוג של phoneparts

phoneparts

עדכונים:

פוסטים: 239

החל ממאי 2017

Since we have been running a mobile phone repair shop for years, this procedure is quite familiar to us and needed to take almost every day. Today we got the boxes of new iPhone LCD screen and digitizer delivered, we need to test these new screen digitizers before stock-in. Another busy day, let’s show you how we test

1. Check the external parts
Here we mainly check on the good tightness of the metal frame, make sure no scratch, no gap or damage on the edge. Next, we would see if the flexes are good with no brake, no unglued part or no corrosion on it. Check the golden finger as well, make sure no damage or gap on it. Furthermore, we will check the home button connector on the visional condition. Check the glass lens on no scratch or damage, no bubbles or dust on the display area.

2. Test the installation compatibility 
Move to the next section on test the new display screen digitizer installation compatibility. Use a standard iPhone back housing for testing. Connect and install the new display to the back housing to see if it is right on the position size, not jammed on the back housing, no gap on the edge, no clack while pressing on it.

3. Test the working functions  
If the former steps are passed, we will move to the last procedure – the functional test. First, check the screen 3D functions, make sure all sections on the display screen are normal on touch response. Tap on and activate each App icon on the screen, make sure they could be opened normally. Tap on the App and hold time, drag the icon to any position of the screen to check if it is moving smoothly. Test the keyboard response on message texting, tap on each letter on the keyboard to see if it’s normal. Test the fingerprint touch ID sensor, we need to connect the new display to the fingerprint sensor test machine. Usually, the steel plate installation test is needed. Besides, we will test on the auto-brightness response, the microphone, the ear speaker as well. After all these functional items are tested, we can attach the qualified tab on this new display screen digitizer.

It seems the whole process is a little complicated, but this is very important in our work. Anyway, details about our new iPhone LCD display touch screen and digitizer you may also find on our online store. You can also contact us on [email protected] if you have any questions on our LCD screen test.

iPhone X LCD screen and digitizer assembly

עוד מהבלוג של phoneparts

Samsung Galaxy S9 review

I've been testing Samsung's new Galaxy S9 and larger, slightly stepped-up Galaxy S9 Plus($839.99 at Amazon.com) for over a week. And while I'm 85 percent certain that these beautiful, powerful phones are two of the best that money can buy, the remaining 15 percent of me is disappointed that the world's largest Android brand couldn't do a little better. From a bird's eye view, I see...

תגובות

תגיות:

פורסם לפני 2 years

Google Pixel 2 release date, news and rumors

Another leak indicates that previous images of the purported Pixel 2 we've seen might not be accurate to how it will look. We hope you weren't too attached to those thin bezels. Recently, the purported Pixel 2 has shown up in the flesh, seeming to confirm some design elements we've seen, as well as that the big bezels are likely to make a return, whether you like it or not. Last, but not...

תגובות

פורסם לפני 3 years
תצוגה מקדימה

How to Replace iPad Pro 10.5” Touch Screen and Digitizer Assembly

Step 1: Tear down and separate the iPad Pro 10.5 touch screen and digitizer assembly  1.1 Turn off the iPad, hot air gun blowing on the screen edge to soften the frame adhesive glue, then use a thin steel pry tool to make a gap between the screen and the frame  1.2 Use hard plastic triangle plectrum to slice around the gap slowly, you may need three or more plectrums...

תגובות

פורסם לפני 5 months

תגובות

טופ 20 - בלוגים

מתחברים לסלונה

הכתבות הנקראות ביותר

אסור לפספס

בחזרה למעלה